Atlas Model SB 100FL turnichet set retractable fast, with 3 passageways, wings and secure glass lid.
Atlas Speedy model SB 100FL series is a retractable quick-cooked turnike designed to be used in crowded areas for quick and easy passage.
System composed of 2 end units and 2 middle units to create 3 passageways.
The SB 100FL is made of stainless steel.
It is compatible with access control systems, e.g.: card readers/cards.
Body: AISI 304 stainless steel.
Wings: 10 mm of secured glass.
Cap: 10 mm secure glass with customization capability.
Latime pass: 500 - 650 mm.
Mechanism: Adjustable control of the couple so as not to harm the person in situations of physical blocking.
Sensor: each turnichet has 6 photoelectric detection sensors.
LED indicators: optional. They can be applied under the lid, front section and on the wings.
Function: bidirectional controlled or uncontrolled.
In an emergency situation: The passage becomes free, compatible with any alarm system (fire, panic, etc.). The pass becomes free if the alarm system disconnects.
In case of power failure: The passage becomes free.
Feed: 110 - 220 V, 60 Hz.
Operating temperature: -10 °C / +50 °C.
Speed of passage: 40 people/min.
Weight: ~ 80 kg.
Security level: mediu.
Mechanism
24VDC motor. Mechanical action is done using a belt and roller. Mechanism control is done with 2 inductive sensors. The wings are designed so that they cannot be opened manually from the outside when in the closed position. The pass speed is calculated as 40 persons per minute, this rate varying according to the access control system used.
Main Body
The internal chassis is galvanized to withstand rust and corrosion.
Side panels
AISI 304 stainless steel, satin finish 4N. Optionally, it can be made from plexiglas, decorative stainless steel or electrostatic paint.
Wings
Of 10 mm secured and sanded glass. Optionally, it can be made of plexiglas or polycarbonate. Optionally, the wings can be decorated with logos and lights.
Cover
The cover is made of a standard 10 mm secure glass, and a supporting sheet for additional impact resistance has been added under it. Provides the ability to print any desired visual item on the glass. This special printing technique offers the opportunity to get a more elegant look by using elements such as granite, wood, images, logos etc. As an option, the entire outer body can be designed and produced using this technique.
Electronic control plate and operating voltage
Each unit controls the passage through communication with the other units through the Master-Slave mode, thus ensuring coordination at the opening of the passage. The CMOS, TTL and 5 – 24VDC inputs are available as options. Passing directions may be set as free or controlled by means of control boards. The switching power supply, which provides the possibility to work between 110 and 240V AC, is used. The system works at 24VDC. Operating temperature is between -10 °C and +50 °C. In very cold environments a heater can be installed. Maybe give a sound warning as part of a pass.
Sensor
All turnstiles use high performance sensors, at least 3 sensors being used to scan the passage corridor area. The number of sensors can be increased optionally.
Emergency situations:
In the event of a power failure, the arms allow free passage. There is also an emergency entry on the electronic plate. This NC entry is compatible with any external panel (fire, panic, etc.) and can be easily connected. In the case of disconnection from such devices, the turnstiles automatically allows free passage.
Scope:
These turnstiles are designed to be used in crowded areas for fast crossings.
LED indicators
Optional. It shall apply to the lower part of the cap, the front section and the wings. LED indicators can be selected as Blue or Turkish in standby via the control plate.
