Automatic retractable leg Fadini Vigilo 2250, model 2264L, height 500 mm, diameter 200 mm, thickness 4 mm, anthracite grey, with LEDs.
Fadini Vigilo - Automatic retractable hydraulic step
- Designed and manufactured for control of access in residential areas and also for commercial and industrial applications.
- Hydraulic oil. Hydraulic locking device in high position (standard) and manual emergency descent with a special key provided with the equipment. The solenoid valve (optional) for automatic descent in case of current. Tested for intensive use at low and high temperatures.
- Easy access to components due to the position of the pump and the oil-hydraulic actuator inside the stem allows easy maintenance and reduces installation time. In this way the components are similarly more protected, russ and other deterioration factors are prevented.
- Install simple and fast due to the reduced weight of the foundation tape, it does not require special digging or construction work. Steel cylinder resistant to scratches with cataphoresis treatment painted with polyester powder. Hall-effect limiting sensors, rubber cap, LED lights.
- Versatil. A wide range of accessories for control (emitters, digits etc.) and safety (magnetic loop detector, traffic lights etc.) allow reliable and precise control of the installations. Control unit ELPRO S20 can control up to 2 stems simultaneously, or ELPRO S40 to control up to 4 stalks.
| Diameter: |
200 mm |
| Thick stem |
4 mm |
| Height from the ground |
500 mm |
| Posts material |
Steel S235JRH |
| Treatment and Finishing |
cataphoresis and paint coating
RAL 7016 powder |
| Foundation housing |
hot galvanized |
| Operating temperature |
-20 - +80 °C
-40 °C with heater* |
| Type of oil |
Fatini oil code 708L |
| Feeding |
230 Vac - 50 Hz |
| Absorbed power |
330 W |
| Current absorbed |
1.8 A |
| Power performance |
0.25 kW / 0.33 HP |
IP protection level
a hydraulic motor pump |
67 |
| Frequency of use (cycles/day) |
intensive use / 2000 |
| Resisting impact |
30.000 J |
| Break resistance |
160.000 J |
| Maximum static pregnancy |
20.000 Kg |
*Possibility to install the stem in very cold areas, -40 °C or even less, without freezing problems. See code 2590L or, as an alternative for existing installations, code 2746L.