Semi-automatic manual retractable flap Fadini Gaspo 252 2520L, height 500 mm, diameter 200 mm, thickness 4 mm, anthracite grey.
GASPO 252 is a manually operated traffic control pillar consisting of a steel cylindrical pillar with a diameter of 200 mm and a height of 500 mm.
Lifting and lowering movements of the pillar shall be carried out manually by means of two gas arches inside the cylinder. For lifting the manual pole, insert the key into the unlocking hole, properly protected by a cap, and rotate it in the opposite direction to those of the clock; in this way, by acting the lock connected to the release rod, the locking plate is decoupled and the pole begins to rise. The two gas arches expand and push the pole up, slowing the movement on the last 10 cm of the total displacement of the cylinder. Once the pole has been fully raised (50 cm from the ground level), the arch that is attached to the central plate allows the plate to return to the locking position in the upper fan, the key is thus decoupled and can be removed.
To lower the stem, perform the same operations, but vice versa: insert the key into the head of the pole, rotate it clockwise and push the pole down to the ground level, thus compressing the two arches with gas.
The locking plate is thrown back to the bottom and securely lock the pole in the bottom position. Once Gaspo 252 is securely locked, the key can be removed.
No adjustment or calibration is necessary with this type of manual pillar, which makes it a very fast and easy to install and operate unit.
Gaspo 252 is provided with a rubber edge, to protect the pole, and a reflective self-adhesive tape, to make the pole well visible at any time of day and night, even in adverse weather conditions; it comes complete with a ground cylinder, designed to be sunk into the concrete foundation and anchor plates are provided to be fixed on it to improve the grip.
| Diameter: |
200 mm |
| Thick stem |
4 mm |
| Height of the ground |
500 mm |
| Material |
Steel S235JRH |
| Treatment and Finishing |
cataphoresis and paint coating
RAL 7016 powder |
| Foundation housing |
hot galvanized |
| Resisting impact |
30.000 J |
| Break resistance |
160.000 J |
| Weight |
63 kg |